In addition to the printed part you will need 2 M3 lock nuts and 2 M3 screws (the length of the screw will vary depending on the thickness of the panel that you want to install it on.)

bungee receiver coolaroo blindparts 30mm idle Store locator - Map Takes (2) 5/16 bolts. Just add a 3mm bungee cord and its ready. - eBay Money Back Guarantee - opens in a new window or tab, cleared payment - opens in a new window or tab, - for PayPal Credit, opens in a new window or tab, Learn more about earning points with eBay Mastercard, - eBay Return policy - opens in a new tab or window, - eBay Money Back Guarantee - opens in a new tab or window. Flush mount Truck bed tie down, capacity 1500lb. I ran supports inside the hex holes. Something went wrong.

Flush Mount tie-down.

A simple model of a simple and robust tie down winch available on truck accessories market, a Simple Battery tie down for my bigger (140mm Top width) Battery.

View cart for details. I printed in PETG with 4 perimeters, and 60% infill (probably overkill). to print out four of these.

The rivets spun when I tried to dill them so I had to cut through the side which ruined the current tie down which were $10 each so I printed replacements. By Made it to replace the stock tie down, sizing and dimensions are correct for just about every subaru model that use the standard j-hook tie down. Useful little tie down to use in garage, car etc use for a bungee cord. It's just an acrylic model, so don't tie anything to the roof with it!

This is a strap tie down box for car transport.

Used for luggage, roof racks etc. Printed PLA using Supports, 50% infill, 2 shells and 0.10mm layer ht.

The hole is 3.3mm in diameter to suit a M3 bolt. 2) I made it longer to handle the straps I was using. Store locator - Stores, Current Weekly Ads Food & Product Recalls, Copyright 2011- tie down ratchet assembly. This is a simple cable tie mount that I needed for a project. Fast, easy, without any engagement!, truck & ute, load restraint.

All brand names, trademarks and business material belong to there respective owners Cargo Area Anchor Point / Bungee Tie Down.

It can take up to a 4mm x 1.5 thick cable tie. 2022 Weekly Ads Online | Conception & SEO

{"modules":["unloadOptimization","bandwidthDetection"],"unloadOptimization":{"browsers":{"Firefox":true,"Chrome":true}},"bandwidthDetection":{"url":"","maxViews":4,"imgSize":37,"expiry":300000,"timeout":250}}. This was designed to use an existing ball bungee to attach to an item with a round 'hook' Just make sure you give yourself enough clearance to easily remove the supports. My Felix 3.0 printer took 5 min. Originally made for the cargo area of my jeep to be able to secure items. Tie down bracket that can be used for anything with a round base. The factory stamped-steel tie down in my Honda is beginning to rust, and I have decide to make a new one. This is great for tying down back pack straps or carrying small light items with easy access such as LET lights or Mini Containers. This is great for tying down back pack straps or carrying small light items with easy access such as LED lights or Mini Containers. Screw holes are 3mm diameter and the panhead diameter is 7mm.

I took a scan of the old part, reverse-engineered it in CAD, and built a prototype using a 3D printer. I remixed this tie down/ratchet strap organizer. Actual product packaging and materials may contain more and different information than what is shown on our website. 1) removed the rubber band holes and instead added a slot for some hook & loop straps I had. Typically bungee's used are Copyright 1995-2022 eBay Inc. All Rights Reserved. Seller assumes all responsibility for this listing. We recommend that you do not rely solely on the information presented and that you always read labels, warnings, and directions before using or consuming a product.

Powered by STLFinder search engine.

Categories Refresh your browser window to try again. If you don't want as much infill I have found that 4 solid layers on the top and bottom with 20% rectilinear infill produces a very strong part that is just as strong as the solid plastic tie down that I enhanced. Just add a 3mm bungee cord and its ready. This is a replacement bungee ball receiver for a coolaroo roll down outdoor blind. a tie down replacement part for a car battery. Instructions Exterior roller shade bungee tie downs with Circle receiver bungee cords Black. With an account you will be able to: Subscribe to our Newsletter and get the latest content delivered to you. (Designed for use with ABS tolerances.).

This is a scaled up ratchet from a tie-down. Simple, strong, easy to print rope tie down. Which are stronger then the originals because of 100% infill which may not be nessacary but I strength to plastic used ratio. FlexOffers.

The item you've selected was not added to your cart. I designed these for the parcel shelf in the rear of my Mustang MOLLE Bungee with Logo space (Elastic Cord Tie Down), A simple clip with a 16mm space for your logo ------------------------------------------------------------ 3mm holes for the elastic cord adjust the cord length according to what you want to tie Print suggestion: infill at least 35+%.